British Standard Reference : BS907 : 2008
1. Always select the dial test indicator that best fits the application.
2. Care should be taken while using a dial test indicator, try not to jolt the indicator, should you be unfortunate and drop a dial test indicator, get it re-calibrated/repaired before reusing it.
3. Replace worn contact points only with those of a similar length from the centre of the ball stylus to the abutment shoulder.
4. Always clean dial test indicators after use with a lint free paper or cloth and store the indicator in its box or in a dust free area.
5. When using a dial test indicator, always position the dial test indicator in a horizontal plane to the surface media.
6. Always use a rigid stand for mounting the dial test indicator.
7. When measuring a rotating object, either between centres or in a vee block, ensure that the object is rotating in the correct direction. Never rotate the workpiece towards the contact point.
8. When measuring a sliding object, only take readings when the object is moving directly towards the contact point, never away from the contact point or in a sideways manner.
9. Avoid parallax errors by reading the dial directly from the front and square on to the dial.
10. Never oil a dial test indicator as this attracts contamination, should the movement become erratic then the dial test indicator should be submitted to a reputable repair agent.
11. Try not to expose dial test indicators to direct sunlight or in a high humidity environment.
12. Never use a dial test indicator that has not been calibrated, if in doubt consult an appropriate authority.
British Standard Reference : BS 907 : 2008
1. Always select the dial test indicator that best fits the application.
2. Care should be taken while using a dial test indicator, try not to jolt the indicator, should you be unfortunate and drop a dial test indicator, get it re-calibrated/repaired before reusing it.
3. Replace worn contact points.
4. Always clean dial test indicators after use with a lint free paper or cloth and store the indicator in its box or in a dust free area.
5. When using a dial test indicator, always position the dial test indicator square in both planes to the surface media.
6. Always use a rigid stand for mounting the dial test indicator.
7. Avoid parallax errors by reading the dial directly from the front and square on to the dial.
8. Never oil a dial test indicator as this attracts contamination, should the movement become erratic then the dial test indicator should be submitted to a reputable repair agent.
9. Try not to expose dial test indicators to direct sunlight or in a high humidity environment.
10. Never use a dial test indicator that has not been calibrated, if in doubt consult an appropriate authority.
Rhopoint Metrology Ltd Eurolab House, Unit 10 Valepits Road, Garretts Green Industrial Estate, Birmingham, B33 0TD
Rhopoint Metrology Ltd Brunel House, 28 Old Mills Industrial Estate, Paulton, BS39 7SU
