£128.00
Calibration options available
Graduation 0.01 / 0,1 mm This is a one revolution dial indicator. It offers you the following benefits:
Bezel clamp and lifting lever (optional) can be attached to either right or left side. They can be easily installed without tools.
No through screw holes on the frame and secure adhesion between the bezel and the crystal as well as the use of an O-ring prevents water or oil penetration.
It eliminates the possibility of reading errors due to miscounting multiple revolutions.
| Weight | 136 g |
|---|---|
| Family | |
| Unit | |
| Calibration Type | |
| Indicator Type | Plunger Type |
| Range (inch) | |
| Range (mm) | |
| Graduation (inch) | |
| R MPE (Repeatability) (µm) | 3 |
| Graduation (mm) | |
| Standard | |
| MPE measuring range (µm) | 7 |
| Range per rev. (mm) | 1 mm |
| Range per rev. (inch) | 0.02" |
| MPE any 1/10 revolution | 5 |
| Stem (mm) | |
| Stem (inch) | |
| Accuracy (inch) | |
| Digital/Analog | |
| Contact point | Carbide tipped, thread: 4-48UNF, Carbide tipped, thread: M 2.5 x 0.45 mm |
Rhopoint Metrology Ltd Eurolab House, Unit 10 Valepits Road, Garretts Green Industrial Estate, Birmingham, B33 0TD
Rhopoint Metrology Ltd Brunel House, 28 Old Mills Industrial Estate, Paulton, BS39 7SU
